Cylinder Head Torque & Sequence

12 Point Head Bolts
Torque
First Turn 34 Nm
Second Turn 90 degrees
Third Turn 90 degrees





Recessed Head Bolt Torque 18 Nm

NOTE: If any cylinder head bolt is broken or deformed, replace it. Apply a light coat of engine oil on the threads and under the heads of the cylinder head bolts.





Cam Bearing Cap Bolts
Torque 16 Nm

Head Surface Warpage (Deck Surface Side)
Maximum 0.10 mm

Head Surface Warpage (Exhaust Side)
Maximum 0.10 mm

Head Surface Warpage (Intake Side)
Maximum 0.10 mm