First and Reverse Brake

INSPECTION





1. INSPECT DISC, PLATE AND FLANGE
Check to see if the sliding surfaces of the disc, plate and flange are worn or burnt. If necessary, replace them.

HINT:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed numbers is defaced, replace all discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.





2. CHECK PISTON RETURN SPRING
Check the return spring free length together with the spring seat.
Standard free length: 12.9 mm (0.508 inch)