Symptom Related Diagnostic Procedures
PROBLEM SYMPTOMS TABLEHINT: If a normal code is displayed during the DTC check but the trouble still occurs, check the circuits for each symptom in the order given in the charts and proceed to the appropriate troubleshooting given.
The Matrix Chart is divided into 3 charts.
When troubleshooting, check Chart 1 first. If instructions are given in Chart 1 to proceed to Chart 2 or 3, proceed as instructed.
- If the instruction "Proceed to next circuit inspection shown on matrix chart" is given in the flow chart for each circuit, proceed to the circuit with the next highest number in the table to continue the check.
- If the trouble still occurs even though there are no abnormalities in any of the other circuits, then check and replace the ECM.
Problem Symptoms Table - Electronic Circuit Matrix Chart:
CHART 1: ELECTRONIC CIRCUIT MATRIX CHART
Problem Symptoms Table - ON-Vehicle Repair (Part 1):
Problem Symptoms Table - ON-Vehicle Repair (Part 2):
CHART 2: ON-VEHICLE REPAIR
Problem Symptoms Table - OFF-Vehicle Repair (Part 1):
Problem Symptoms Table - OFF-Vehicle Repair (Part 2):
CHART 3: OFF-VEHICLE REPAIR