Overhaul

DISASSEMBLY




1. REMOVE NO.1 INSTRUMENT PANEL

a. Remove the 3 screws.
b. Using a screwdriver, remove the No.1 instrument panel.

HINT: Tape the screwdriver tip before use.

2. REMOVE SIDE DEFROSTER NOZZLES
3. REMOVE NO.1 DEFROSTER NOZZLE GARNISH
4. REMOVE NO.1 INSTRUMENT PANEL PINS
5. REMOVE NO.1 SIDE DEFROSTER NOZZLE DUCT
6. REMOVE NO.2 SIDE DEFROSTER NOZZLE DUCT
7. REMOVE DEFROSTER NOZZLE
8. REMOVE NO.5 HEATER TO REGISTER DUCT
9. REMOVE NO.4 HEATER TO REGISTER DUCT
10. REMOVE METER HOOD SET BRACKETS
11. REMOVE CENTER BRACKET
12. REMOVE INSTRUMENT PANEL WIRE HARNESS




13. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
Remove the 6 nuts and front passenger airbag assembly as shown in the illustration.

CAUTION:
- Do not store the front passenger airbag assembly with the airbag deployment side facing down.
- Never disassemble the front passenger airbag assembly.

NOTE: When removing the front passenger airbag assembly, take care not to damage the wire harness.

14. REMOVE NO.1 INSTRUMENT PANEL SAFETY PAD
15. REMOVE NO.3 REGISTER

REASSEMBLY
Reassembly is in the reverse order of disassembly.