Service Hints
C3 CRUISE CONTROL ACTUATOR3 - 4 : Approx. 38.5 Ohm
C15 CRUISE CONTROL SW [COMB. SW]
5 - 4 : Continuity with the CRUISE SW on
Approx. 1540 Ohm with the CANCEL SW on
Approx. 240 Ohm with the RES/ACC SW on
Approx. 830 Ohm with the SET/COAST SW on
C18 CRUISE CONTROL ECU
9 - GROUND : 10 - 14 volts with the ignition SW at ON position
12 - GROUND : 4 pulses with 1 rotation of rotor shaft
10 - GROUND : Approx. 1540 Ohm with the CANCEL SW on in the control SW
Approx. 240 Ohm with the RES/ACC SW on in the control SW
Approx. 630 Ohm with the SET/COAST SW on in the control SW
16 - GROUND : Always continuity