Camshaft Position Sensor: Testing and Inspection

ON-VEHICLE INSPECTION

NOTE: "Cold" and "Hot" in these sentences express the temperature of the coils themselves. "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

INSPECT CAMSHAFT POSITION SENSOR
a. Disconnect camshaft position sensor connector.




b. Using an ohmmeter, measure the resistance between terminals.




If the resistance is not as specified, replace the camshaft position sensor.

c. Reconnect the camshaft position sensor connector.