Canada - Interior - Seat Cushion Height Adjuster Improvement

Bulletin
TSB2063

Issue Date
August 24, 2004

Market
Canada



Title
SEAT CUSHION HEIGHT ADJUSTMENT IMPROVEMENT

Component
BODY COMPONENT

Models
'03 - '04 4Runner

Some 2003 and 2004 model year 4Runner vehicles may experience a condition where the seat cushion height adjustment handle is contacted while entering or exiting the vehicle causing the seat adjustment to change. A new seat cushion height adjustment handle has been developed to correct this condition.

APPLICABLE VEHICLES:
- 2003 - 2004 model year 4Runner vehicles produced BEFORE the Production Change Effective VIN shown below.





PRODUCTION CHANGE INFORMATION:






WARRANTY INFORMATION:











PARTS INFORMATION:

REPAIR PROCEDURE:

Refer to ETAS, 2003 or 2004 model year 4Runner Repair Manual:
Section: Seat; Subsection: Front Seat Assembly LH (Manual Seat Type); Overhaul; Step 3.






1. Remove the seat cushion height adjustment handle No.2.
a. Using a screwdriver, disengage the 3 claws and remove the seat cushion height adjustment handle LH.

NOTE:
Tape the screwdriver tip before use.

b. Remove the 2 screws and the seat cushion height adjusting handle.

2. Replace the seat cushion height adjusting handle with a new service part.
3. Installation is the reverse order of removal.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.