Connecting Rod, Engine

Thrust clearance
STD 0.15 - 0.30 mm (0.0059 - 0.0118 inch)
maximum 0.35 mm (0.0138 inch)
Connecting rod thickness 20.80 - 20.85 mm (0.8189 - 0.8209 inch)
Connecting rod bearing center wall thickness
Reference
Mark 1 1.484 - 1.487 mm (0.0584 - 0.0585 inch)
Mark 2 1.487 - 1.490 mm (0.0585 - 0.0587 inch)
Mark 3 1.490 - 1.493 mm (0.0587 - 0.0588 inch)
Mark 4 1.493 - 1.496 mm (0.0588 - 0.0589 inch)
Connecting rod oil clearance
STD 0.038 - 0.064 mm (0.0015 - 0.0025 inch)
Maximum 0.08 mm (0.0031 inch)
Rod bend
Maximum per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Rod twist
Maximum per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)
Bushing inside diameter 22.005 - 22.014 mm (0.8663 - 0.8667 inch)
Bushing oil clearance
STD 0.005 - 0.011 mm (0.0002 - 0.0004 inch)
maximum 0.05 mm (0.0020 inch)
Connecting rod bolt diameter
at tension portion
STD 7.2 - 7.3 mm (0.284 - 0.287 inch)
Minimum 7.0 mm (0.276 inch)
Connecting rod cap x Connecting rod
1st 24.5 Nm (250 kgf-cm, 18 ft. lbs.)
2nd Turn 90° Turn 90° Turn 90°