Rear Seat

DISASSEMBLY

1. REMOVE SEATBACK BOARD




a. Remove the screw and seatback look bezel from the seatback board.
b. Remove the 4 clips and seatback board.
c. Employ the same manner described above to the other side.

2. REMOVE SEATBACK FRAMES
a. Remove the seatback lock knob.
b. Disengage the hook, then remove the hog rings.
c. Remove the seatback lock knob holder.
d. Remove the seatback frame from seatback cover with pad.
e. Employ the same manner described above to the other side.

3. REMOVE SEATBACK LOCK ASSEMBLY




a. Remove the 2 bolts.




b. Remove the bolt and seatback lock assembly through the service hole.
c. Employ the same manner described above to the other side.

4. REMOVE SEATBACK COVER
a. Remove the hog rings and seatback cover from seatback pad.
b. Employ the same manner described above to the other side.

5. REMOVE SEAT CUSHION COVER
a. Remove the hog rings and seat cushion cover from the seat cushion pad.
b. Employ the same manner described above to the other side.

REASSEMBLY

1. INSTALL SEAT CUSHION COVER
Install the seat cushion cover with new hog rings to the seat cushion pad.

HINT: When installing hog rings, take care to prevent wrinkles as little as possible.

2. INSTALL SEATBACK COVER
a. Install the seatback cover to the seatback pad with new hog rings.

HINT: When installing hog rings, take care to prevent wrinkles as little as possible.

b. Employ the same manner described above to the other side.

3. INSTALL SEATBACK LOCK ASSEMBLY




a. Install the seatback lock assembly through the service hole, then install the bolt.

Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)




b. Install the 2 bolts.

Torque: 17 N.m (175 kgf.cm, 13 ft.lbf)

c. Employ the same manner described above to the other side.

4. INSTALL SEATBACK FRAME
a. Install the seatback frame to the seatback cover with pad.
b. Install the seatback lock knob holder.
c. Engage the hook, then install the new hog rings.

HINT: When installing hog rings, take care to prevent wrinkles as little as possible.

d. Install the seatback lock knob.
e. Employ the same manner described above to the other side.

5. INSTALL SEATBACK BOARD




a. Install the seatback board with the 4 clips.




b. Install the seatback lock bezel with the screw.
c. Employ the same manner described above to the other side.