Manual Shifting Test

MANUAL SHIFTING TEST

HINT: With this test, it can be determined whether the trouble is within the electrical circuit or is a mechanical problem in the transaxle.




a. Disconnect the solenoid wire.

b. Inspect the manual driving operation.

Check that the shift and gear positions correspond with the table below.




While driving, shift through the L, 2 and D positions.
Check that the gear changes, corresponding to the shift position.

HINT: If the L, 2 and D positions and the gear positions are difficult to distinguish, conduct the above manual shifting test.

If any abnormality is found in the above test, the problem is in the transaxle itself.

c. Connect the solenoid wire.
d. Clear the DTC.