Second Brake

SECOND BRAKE

Components





Second Brake Piston Disassembly

- REMOVE SECOND BRAKE PISTON





a. Apply compressed air to the oil hole to remove the piston.





b. Remove the 2 O-rings from the piston.

Second Brake Component Inspection





- INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surfaces of the discs, plates and flange are worn or burnt. If necessary, replace them.

HINT:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed numbers are defaced, replace all discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.

Second Brake Piston Assembly

- INSTALL PISTON



a. Coat anew O-ring with ATF.
b. Install the 2 new O-rings on the piston.




c. Press the piston into the drum, being careful not to damage the O-rings.