Front Bumper: Service and Repair
REPLACEMENTHINT:
- The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.
- On the RH side, use the same procedures as on the LH side.
1. REMOVE RADIATOR GRILLE
a. Remove the 4 clips and radiator grille.
2. REMOVE FRONT FENDER LINER RH
a. Remove the 2 screws and 4 clips.
b. Remove the screw and partially remove the front fender liner.
HINT: It is only necessary to partially remove the front fender liner LH in order to be able to remove the front bumper cover.
3. REMOVE FRONT FENDER LINER LH
4. REMOVE FRONT BUMPER COVER
a. Remove the 6 screws, 2 bolts and front bumper cover.
b. w/ Fog lamp:
Disconnect the fog lamp connector.
5. REMOVE FOG LAMP LAMP UNIT RH(W/ FOG LAMP)
6. REMOVE FOG LAMP LAMP UNIT LH (W/ FOG LAMP)
7. REMOVE FRONT BUMPER HOLE COVER RH (W/O FOG LAMP)
8. REMOVE FRONT BUMPER HOLE COVER LH (W/O FOG LAMP)