Windshield Wiper Motor Assy
REPLACEMENT1. REMOVE WINDSHIELD WIPER ARM COVER
2. REMOVE FR WIPER ARM RH
a. Stop the front wiper motor assembly at the automatic stop position.
b. Remove the nut to remove the front wiper arm RH.
3. REMOVE WINDSHIELD WIPER ARM COVER
4. REMOVE FR WIPER ARM LH
a. Remove the nut to remove the front wiper arm LH.
5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
a. Remove the 6 claws.
b. Remove the 2 clips.
c. Remove the 9 claws to remove the cowl top ventilator louver.
6. REMOVE WINDSHIELD WIPER LINK ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 bolts.
c. Slide the windshield wiper link assembly to vehicle's passenger side. Disengage the meshing of the rubber pin to remove the wiper link assembly.
7. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
a. Disengage the meshing of 2 rods at the clank arm pivot of the windshield wiper motor assembly.
b. Using a torx socket wrench, remove the 2 bolts to remove the windshield wiper motor assembly.
8. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
a. Apply MP grease to the clank arm pivot of the windshield wiper motor assembly.
b. Using a torx socket wrench, install the windshield wiper motor assembly with the 2 bolts to the windshield wiper link assembly.
Torque: 5.39 N.m (55 kgf.cm, 48 in.lbf)
9. INSTALL WINDSHIELD WIPER LINK ASSEMBLY
a. Engine the meshing of the rubber pin.
b. Install the windshield wiper link assembly with the 2 bolts.
Torque: 7.0 N.m (71 kgf.cm, 61 in.lbf)
c. Connect the connector.
10. INSTALL FR WIPER ARM LH
a. Clean the wiper pivot serration with the with brush.
b. Fix the front wiper arm driver side with a nut in the way that the front wiper blade on the position shown in the illustration.
Torque: 24 N.m (240 kgf.cm, 17 ft.lbf)
11. INSTALL FR WIPER ARM RH
a. Clean the wiper pivot serration with the with brush.
b. Fix the front wiper arm passenger side with a nut in the way that the front wiper blade on the position shown in the illustration.
Torque: 24 N.m (240 kgf.cm, 17 ft.lbf)
c. Operate the wiper while running the water or the washer fluid over the window, and check the wiping condition and that the wiper does not hit against the vehicle body.