With Manufacturer's Scan Tool

Clear the DTC

The DTC and freeze frame data will be erased by either action.

1. Operating the OBD II scan tool (complying with SAE J1978) or hand-held tester to erase the codes (For operating instructions, see the OBD II scan tool's instruction book).
2. Disconnecting the battery terminals or E.F.I.1 fuse.

NOTE: If the hand-held tester switches the ECM from the normal mode to the check mode or vise versa, or if the ignition switch is turned from ON to ACC or OFF during the check mode, the DTCs and freeze frame data will be erased.