Component Tests and General Diagnostics

INSPECTION







1. INSPECT LIGHT CONTROL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







2. INSPECT HEADLIGHT DIMMER SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







3. w/ Wireless Door Lock and w/o Daytime Running Light Relay: INSPECT HEADLIGHT CONTROL RELAY (Marking: H-LP) CONTINUITY
If continuity is not as specified, replace the relay.




4. INSPECT SIDE MARKER CONTINUITY
Using an ohmmeter, check that continuity exists between terminals.
If continuity is not as specified, replace the light assembly or bulb.