Component Tests and General Diagnostics

INSPECTION





1. INSPECT TIRE
a. Check the tires for wear and proper inflation pressure.
Cold tire inflation pressure: 200 kPa (2.0 kgf/cm2, 29 psi)
b. Using a dial indicator, check the runout.
Tire runout: 1.0 mm (0.039 inch) or less





2. ROTATE TIRE

HINT:
^ Rotate tires as shown in the illustration.
^ Rotate as shown in (B) if the spare tire is included in the rotation.





3. INSPECT WHEEL BALANCE
a. Check and adjust the off-the-car balance.
b. If necessary, check and adjust the on-the-car-balance.
Imbalance after adjustment: 8.0 g (0.018 lbs.) or less
4. CHECK WHEEL BEARING FOR LOOSENESS
5. CHECK SUSPENSION FOR LOOSENESS
6. CHECK STEERING LINKAGE FOR LOOSENESS
7. CHECK BALL JOINT FOR LOOSENESS
8. CHECK SHOCK ABSORBER WORKS PROPERLY
- Check for oil leak.
- Check mounting bushings for wear.
- Bounce the front and rear of the vehicle.