Starter Relay: Testing and Inspection

INSPECTION




1. REMOVE RELAY BOX COVER

2. REMOVE STARTER RELAY (Marking: ST)




3. INSPECT STARTER RELAY
a. Inspect the relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.

2. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.




b. Inspect the relay operation.
a. Apply battery positive voltage across terminals 1 and 2.
b. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.

4. REINSTALL RELAY BOX COVER

5. REINSTALL STARTER RELAY