Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Canada - Compuetrs/Controls - CAN Module Fails to Initialize
  • A/T Controls - MIL ON/DTC P2742 Set
  • Engine Controls - MIL ON/DTC's P0136/P0156 Set
  • Engine Controls - Error When Reprogramming ECU
• By Symptom
  • Customer Interest
    • Canada - Compuetrs/Controls - CAN Module Fails to Initialize
    • A/T Controls - MIL ON/DTC P2742 Set
    • Engine Controls - MIL ON/DTC's P0136/P0156 Set
    • Engine Controls - Error When Reprogramming ECU
  • False instrument warning light/gauges
    • Engine Controls - MIL ON/DTC's P0136/P0156 Set
  • Low, Dead battery
    • Electrical - 'Crank Hold System' Jump Starting
• All Technical Service Bulletins
  • Computers/Controls - Techstream(R) Reprogramming Procedure
  • Fuel System - Accelerator Pedal Sensor Service Precaution
  • Canada - Engine Controls - Techstream(R) ECU Re-Flash Procedure
  • Canada - Compuetrs/Controls - CAN Module Fails to Initialize
  • Canada - Engine Controls - VIN Entering During PCM Replacement
  • Canada - Engine Controls - AF Sensor Identification
  • Canada - Engine Controls - ECU Flash Reprogramming Process
  • Engine Controls - A/F And O2 Sensor Identification
  • A/T Controls - MIL ON/DTC P2742 Set
  • Engine Controls - MIL ON/DTC's P0136/P0156 Set
  • Engine Controls - Entering VIN When Replacing PCM/ECM
  • Engine/Transmission Controls - Resetting ECM Memory
  • Electrical - 'Crank Hold System' Jump Starting
  • Engine Controls - Error When Reprogramming ECU
  • Engine Controls - ECU Reprogramming Procedure
    • Overview
    • Operation Procedure
  • Engine Controls - Bank 1/Bank 2 O2 Sensor identification
  • A/T - Park/Neutral Switch Installation
  • Canada - ECM Reset Memory Function