Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2004 >> RAV4 2WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Crankshaft Main Bearing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Main Bearing


Standard Bearing Center Wall Thickness:




Crankshaft:




Standard bearing center wall thickness:






CRANKSHAFT BEARING CAP BOLTS
Using vernier calipers, measure the tension portion diameter of the bolt.

Standard diameter 7.5 to 7.6 mm (0.2953 to 0.2992 inch)
Minimum diameter 7.2 mm (0.284 inch)


MAIN BEARING CAP BOLTS







REMOVAL
Uniformly loosen and remove the 10 main bearing cap bolts in several passes, in the sequence shown


CYLINDER HEAD:






INSTALLATION
Hold the crankshaft pulley bolt with a wrench, and install the 6 bolts evenly.

Torque 41 Nm (418 kgf-cm, 30 ft. lbs.)


pro multis · About Operation CHARM