Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2004 >> RAV4 4WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning

PRECAUTION

1. WIRE HARNESS REPAIR




a. When repairing a wire harness, wrap the repaired part with a vinyl tape.

NOTE:
- The CANL wire harness and CANH wire harness must be installed together all the time.
When installing, make sure to twist them.
- The difference in the length of the CANL wire harness and CANH wire harness should be within 100 mm (3.93 in.).




b. Do not perform the bypass wiring between the connectors.

NOTE: If you perform the bypass wiring, the characteristic of the twisted wire harness will be lost.

2. CONNECTOR HANDLING




a. When inserting tester probes into a connector, insert them from the back of the connector.




b. If it is impossible to measure the resistance from the back of the connector, use a repair wire to measure it.
pro multis · About Operation CHARM