System Specifications

Cylinder block
Cylinder head surface warpage Maximum 0.07 mm (0.0028 inch)

Cylinder bore diameter
STD STD Mark 1 94.002 - 94.010 mm (3.7009 - 3.7012 inch)
Mark 2 94.010 - 94.023 mm (3.7012 - 3.7017 inch)
Mark 3 94.023 - 94.031 mm (3.7017 - 3.7020 inch)
Maximum STD 94.231 mm (3.7099 inch)
O/S 0.50 94.731 mm (3.7296 inch)

Main bearing cap bolt tension portion diameter
STD 10.760 - 10.970 mm (0.4236 - 0.4319 inch)
Minimum 10.40 mm (0.4094 inch)

Crank pin diameter
Torque 51.982 - 52.000 mm (2.0465 - 2.0472 inch)

Main journal taper and out-of-round Maximum
Torque 0.02 mm (0.0008 inch)

Main journal bore diameter on cylinder block (with main bearing)
Torque 66.986 - 67.000 mm (2.6372 - 2.6378 inch)

Main journal oil clearance
STD No.1, No.2 0.028 - 0.046 mm (0.0011 - 0.0018 inch)
others 0.040 - 0.058 mm (0.0016 - 0.0023 inch)
Maximum 0.065 mm (0.0026 inch)

Main journal diameter
Torque 166.988 - 67.000 mm (2.6373 - 2.6378 inch)

Main bearing cap x Cylinder block
1st 27 Nm (275 kgf-cm, 20 ft. lbs.)
2nd Turn 90° (Turn 90°, Turn 90°)

Piston ring groove clearance
No.1 0.030 - 0.080 mm (0.0012 - 0.0031 inch)
No.2 0.030 - 0.070 mm (0.0012 - 0.0028 inch)

Crankshaft pulley x Crankshaft
Torque 245 Nm (2,500 kgf-cm, 181 ft. lbs.)