System Specifications

Install the timing belt cover with the 6 bolts.
Torque 8.5 Nm (87 kgf-cm, 76 inch lbs.)

Temporarily install the tensioner with the 2 bolts. Alternately tighten the 2 bolts.
Torque 27 Nm (280 kgf-cm, 20 ft. lbs.)

Temporarily install the crankshaft pulley bolt and the washer to the crankshaft.
Turn the crankshaft counterclockwise by approximately 60°. Using SST, turn the crankshaft pulley, and align the timing marks of the timing pulley and the No. 3 timing belt cover.
SST 09960-10010 (09962-01000, 09963-01000)

INSTALL CRANKSHAFT PULLEY
Align the keyway of the pulley with the key located on the crankshaft and slide the pulley into place.
Using SST, install the pulley bolt.
SST 09213-54015 (91651-60855), 09330-00021
Torque 220 Nm (2,250 kgf-cm, 162 ft. lbs.)