Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heating and Air Conditioning: Adjustments

V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1

ADJUSTMENT







1. ADJUST V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Loosen bolt A.
b. Loosen bolt B.
c. Apply drive belt tension by turning bolt C.
Drive belt tension:
New belt: 160 to 180 lbf
Used belt: 115 to 135 lbf


HINT:
- "New V belt" refers to a belt which has been used for less than 5 minutes on a running engine.
- "Used V belt" refers to a belt which has been used for 5 minutes or more on a running engine.




d. Tighten bolt A.

Torque: 58 Nm (591 kgf.cm, 43 ft.lbf)

e. Tighten bolt B.

Torque: 17.5 Nm (178 kgf.cm, 12 ft.lbf)