Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2004 >> Solara V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heating and Air Conditioning: Service and Repair

V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1

REPLACEMENT




1. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Loosen bolt A.
b. Loosen bolt B.
c. Loosen bolt C and remove the V belt.




2. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Temporarily install the V belt as illustrated.







3. ADJUST V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Apply drive belt tension by turning bolt C.
Drive belt tension:
New belt: 160 to 180 lbf
Used belt: 115 to 135 lbf

NOTE:
- "New V belt" refers to a belt which has been used for less than 5 minutes on a running engine.
- "Used V belt" refers to a belt which has been used for 5 minutes or more on a running engine.
- After installing the V belt, check that it fits properly in the ribbed grooves.




4. FULLY TIGHTEN V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Tighten bolt A.

Torque:58 Nm (591 kgf.cm, 43 ft.lbf)

b. Tighten bolt B.

Torque:17.5 Nm (178 kgf.cm, 12 ft.lbf)
pro multis · About Operation CHARM