Work Procedure

1. REPLACE THE NAVIGATION DVD

(a) Turn the ignition switch to the "ACC" or "ON" position.





(b) Press the "OPEN" button to tilt the navigation display.





(c) Press the "MAP" button to remove the old navigation DVD.

(d) Remove and discard the old DVD.





(e) Insert the new navigation DVD.

NOTE:
Be sure to install the DVD marked: "DATA ver.04.2"





(f) Push the "OPEN" button again to close the display panel.

2. VERIFY THAT THE SEARCH AREA IS SET TO THE LOCAL AREA AS DESCRIBED IN THE NAVIGATION SYSTEM OWNER'S MANUAL

3. PROCEED TO COMPLETION LABEL INSTALLATION UNDER DEALER LETTER/BULLETIN INFORMATION.