Connecting Rod, Engine

Connecting rod
Thrust clearance
STD 0.160 - 0.312 mm (0.0063 - 0.0123 inch)
Maximum 0.35 mm (0.0138 inch)
Connecting rod big end inside diameter
STD
Mark 4 56.000 - 56.006 mm (2.2047 - 2.2050 inch)
Mark 5 56.006 - 56.012 mm (2.2050 - 2.2052 inch)
Mark 6 56.012 - 56.018 mm (2.2047 - 2.2054 inch)
Connecting rod oil clearance
STD 0.030 - 0.055 mm (0.0012 - 0.0022 inch)
U/S 0.25 0.031 - 0.071 mm (0.0012 - 0.0026 inch)
Maximum 0.10 mm (0.0039 inch)
Rod out-of-alignment
Maximum per 100 mm (3.94 inch) 0.05 mm (0.0020 inch)
Rod twist
Maximum per 100 mm (3.94 inch) 0.15 mm (0.0059 inch)
Bushing inside diameter 24.008 - 23.017 mm (0.9452 - 0.9455 inch)
Connecting rod bolt outside diameter
STD 7.80 - 7.90 mm (0.3071 - 0.3110 inch)
Minimum 7.60 mm (0.2992 inch)

Connecting rod cap x Connecting rod
1st 45 Nm (460 kgf-cm, 33 ft. lbs.)
2nd Turn 90°