Ignition Timing

a. Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040

HINT: After engine rpm is kept at 1,000 - 1,500 rpm for 5 seconds, check that it returns to idle speed.

b. Using a timing light, check the ignition timing.
Ignition timing: 8 - 12° BTDC @ idle (Transmission in neutral position)
c. Remove the SST from the DLC3.
SST 09843-18020

FURTHER CHECK IGNITION TIMING
Ignition timing: 12.5 - 22° BTDC @ idle (Transmission in neutral position)

HINT: The timing mark moves in a range between 12.5° and 22°.