Keyless Entry: Service Precautions
PRECAUTION1. NOTICES WHEN CHECKING
a. The wireless door lock remote control function operates only when the following 3 conditions are satisfied
1. All the doors are closed.
2. No key is inserted in the ignition key cylinder.
3. The power door lock system and the back door power window control system operate normally.
HINT:
- The UNLOCK, BACK WINDOW and PANIC functions operate even when any of the doors is open.
- The UNLOCK, BACK WINDOW and PANIC functions operate even when the key is in the ignition key cylinder. However, these functions are disabled when the ignition switch is turned ON.
b. The wireless door lock remote control operational area differs depending on the situations
1. The operational area differs depending on the operators and the ways the transmitter is held.
2. In some places, the operational area will be reduced due to the vehicle body shape and the influence of the surrounding environment, or the remote control function will only operate partially.
3. Since the transmitter uses faint electric waves, strong electric waves or noise in the frequency used may reduce the operational area or the remote control may not function.
4. When the battery weakens, the operational area is reduced or the remote control may not be operated.
HINT: If the door control transmitter has been left in a place that is exposed to the direct sunlight, such as on the instrument panel, it may cause the battery to weaken or other trouble.