DAC Indicator Light Circuit (Remains ON)

DAC INDICATOR LIGHT CIRCUIT (REMAINS ON)

CIRCUIT DESCRIPTION

The DAC indicator light comes on when the downhill assist control is ready.

HINT:
Even if the DAC switch is pressed, the DAC indicator light will blink and DAC will not be activated under the following conditions:
- Transfer is in 2WD or H4 mode.
- ABS system is malfunctioning.
- Temperature of the hydraulic brake booster increases and DAC is temporarily canceled.

Wiring Diagram:

Step 1 - 3:

Step 4 - 6:

Step 7:

INSPECTION PROCEDURE

NOTE: When replacing the master cylinder solenoid, perform zero point calibration. Calibration