Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2005 >> 4 Runner 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

REPLACEMENT
1. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY NO.1
2. REMOVE ENGINE UNDER COVER ASSEMBLY REAR
3. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR





4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Pry off the lock washer and remove the nut.
b. Remove the bolt and park/neutral position switch.
5. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a. Install the park/neutral position switch with bolt.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
b. Install a new lock washer and nut.
Torque: 7 Nm (71 kgf-cm, 62 inch lbs.)
c. Bent the claws on the lock washer to stake the nut.
d. Adjust the park/neutral position switch.
6. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
7. INSTALL ENGINE UNDER COVER ASSEMBLY REAR
8. INSTALL ENGINE UNDER COVER SUB-ASSEMBLY NO.1
9. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

pro multis · About Operation CHARM