Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2005 >> Highlander 2WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

REPLACEMENT

HINT: A bolt without a torque specification is shown in the standard bolt chart.




1. REMOVE ENGINE UNDER COVER NO.1
a. Remove the 6 screws, 2 clips and under cover.




2. REMOVE FRONT FENDER APRON SEAL RH
a. Remove the clip, 2 bolts and apron seal.




3. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt, clamp and sensor.

4. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the sensor and clamp with the bolt.

Torque: 9.0 N.m (92 kgf.cm, 80 in.lbf)

b. Connect the sensor connector.

5. INSTALL FRONT FENDER APRON SEAL RH
a. Install the clip, 2 bolts and apron seal.

6. INSTALL ENGINE UNDER COVER NO.1
a. Install the 6 screws, 2 clips and under cover.
pro multis · About Operation CHARM