Exterior Antenna

W/HOLDER ANTENNA ASSEMBLY

REPLACEMENT

HINT:
- Installation is in the reverse order of removal.

1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2
3. REMOVE FRONT PILLAR GARNISH RH
4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH




5. REMOVE W/HOLDER ANTENNA ASSEMBLY
a. Disconnect the connector,and remove the bolt.
b. Remove the 2 clamps.




c. Tie the string at the tip of the cable of the w/holder antenna assembly.
d. Remove the antenna nut and ornament antenna.




e. Remove the nut and w/holder antenna assembly.

6. INSTALL W/HOLDER ANTENNA ASSEMBLY
a. Install the w/holder antenna assembly with the nut.
b. Install the antenna nut and ornament antenna.
c. Use the string to put the cable of the w/holder antenna assembly.
d. Install the 2 clamps.
e. Connect the connector, install the bolt.