Component Tests and General Diagnostics

CAUTION: Be sure to perform the initialization of the occupant classification ECU if any of the following conditions occur. If the initialization is not performed, the SRS may not operate properly.
- The occupant classification ECU is replaced.
- Accessories (seatback tray, seat cover, etc.) are installed to the vehicle.
- The passenger seat is removed from the vehicle.
- Both the SRS warning light and passenger airbag ON/OFF indicator light ("OFF") come on.
- The vehicle is brought to the workshop for repair due to an accident or collision.

VEHICLE NOT INVOLVED IN COLLISION
a. Perform a diagnostic system check.

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
a. Replace the airbag sensor assembly center.

HINT: The airbag sensor assembly center should be replaced after any of the airbags has deployed, as it has been subjected to the impact.