With Generic Scan Tool
CHECK THE DTC1. Prepare the OBD II scan tool (complying with SAE J 1978) or hand-held tester.
2. Connect the OBD II scan tool or hand-held tester to the DLC3 under the instrument panel lower pad.
3. Turn the ignition switch ON and push the OBD II scan tool or hand-held tester switch ON.
4. Use the OBD II scan tool or hand-held tester to check the DTCs and freeze frame data; note them down. (For operating instructions, see the OBD II scan tool's instruction book.)
5. See trouble code descriptions to confirm the details of DTCs.