Without Scan Tool

CHECK THE DTC






HINT: If a malfunction occurs in the speed sensor or actuator, etc. during cruise control driving, the ECM automatically cancels the cruise control and turns ON and OFF the CRUISE indicator to inform the driver of a malfunction. At the same time, the malfunction is stored in the memory as a DTC.

Output a DTC using a diagnosis check wire




1. Turn the ignition switch ON.
2. Using SST, connect terminals Tc and CG of the DLC3.
SST 09843-18020

3. Read the DTC on the CRUISE indicator.






HINT:
- If a DTC is not output, inspect the diagnosis circuit.
- As an example, the blinking patterns for codes; normal and 52 are shown in the illustration.