Ultrasonic Sensor No.1

Audio & Visual System - Part 4:

ULTRASONIC SENSOR NO.1

REPLACEMENT

1. REMOVE FRONT FENDER LINER LH
2. REMOVE FRONT FENDER LINER RH
3. REMOVE FRONT BUMPER COVER
4. REMOVE REAR BUMPER COVER




5. REMOVE ULTRASONIC SENSOR RETAINER NO.1
a. Remove the ultrasonic sensor retainer No.1 as shown in the illustration.




6. REMOVE ULTRASONIC SENSOR NO.1
a. Disconnect the connector and remove the ultrasonic sensor No.1.

7. INSTALL REAR BUMPER COVER
8. INSTALL FRONT BUMPER COVER
9. INSTALL FRONT FENDER LINER LH
10. INSTALL FRONT FENDER LINER RH