Canada - Body - Moonroof Initialization Procedure

Bulletin
TSB2134

Issue Date
October 29, 2004

Market
Canada


Title
INITIALIZATION OF MOON ROOF

Component
GENERAL INFORMATION

Models
'05 Sienna

If the battery terminal has been disconnected, the "one-touch tilt up and down," "one-touch slide open and close," and "jam protection" functions of the Moon Roof will be inoperative due to loss of the Moon Roof position memory stored in the microcomputer.

Therefore, please initialize the Moon Roof after reconnecting the battery terminal.

NOTE:
Any time the battery terminal has been disconnected, initialize the Moon Roof after reconnecting the battery terminal.

APPLICABLE VEHICLES:
- 2005 model year Sienna vehicles.






WARRANTY INFORMATION:

INITIALIZATION PROCEDURE:







With ignition switch in the "ON" position, do the following:

1. Push and hold the "TILT UP" side of the switch until the Moon Roof tilts all the way up and then tilts down slightly (approximately 10 mm [0.4 in.] at rear end).
2. Check for proper operation of the "One-touch slide open/close" and "One-touch tilt up/down" functions by pushing the switch briefly to the "SLIDE OPEN" and "TILT UP" positions.

NOTE:
Jam protection function becomes effective through the above initialization procedure.