Without Scan Tool

CLEAR DTC (USING SST CHECK WIRE)

Clearing the DTCs using the SST check wire.

SST 09843-18040




1. Using SST, connect terminals Tc and CG of DLC3.
2. Turn the ignition switch ON.
3. Clear the DTCs stored in ECU by depressing the brake pedal 8 times or more within 5 seconds.
4. Check that the warning light indicates the normal code.
5. Remove the SST from the terminals of DLC3.

HINT: Clearing the DTCs cannot be performed by removing the battery cable or ECU-IG fuse.