Without Scan Tool

CLEAR DTC (USING SST CHECK WIRE)

Clearing the DTCs using the SST check wire.

SST 09843-18040




1. Using SST, connect the terminal Tc and CG of the DLC3.
2. Turn the ignition switch ON.
3. Clear DTC stored in ECU by depressing the brake pedal 8 or more times within 5 sec.
4. Check that the ABS warning light shows the normal code.
5. Remove the SST from the DLC3.

HINT: Disconnect the battery cable during repairs will not erase the DTC in the ECU.