Steering Angle Sensor: Service and Repair

STEERING SENSOR
REPLACEMENT
1. OBSERVE RESTRAINT SYSTEMS SERVICE PRECAUTIONS
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE HORN BUTTON ASSEMBLY
5. REMOVE STEERING WHEEL ASSEMBLY
6. REMOVE STEERING COLUMN LOWER COVER
7. REMOVE SPIRAL CABLE SUB-ASSEMBLY





8. REMOVE STEERING SENSOR
a. Release the claw fittings and remove the steering sensor from the spiral cable.





9. INSTALL STEERING SENSOR
a. Install the steering sensor onto the spiral cable.
10. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
11. INSTALL SPIRAL CABLE SUB-ASSEMBLY
12. INSTALL STEERING COLUMN LOWER COVER
13. CENTER SPIRAL CABLE
14. INSTALL STEERING WHEEL ASSEMBLY
15. INSPECT STEERING WHEEL CENTER POINT
16. INSTALL HORN BUTTON ASSEMBLY
17. INSPECT SRS WARNING LIGHT