Voltage Inverter Assembly

Audio & Visual System - Part 4:

VOLTAGE INVERTER ASSEMBLY

REPLACEMENT

1. REMOVE REAR DOOR SCUFF PLATE LH
2. REMOVE REAR DOOR WEATHERSTRIP LH
3. REMOVE BACK DOOR WEATHERSTRIP
4. REMOVE BACK DOOR SCUFF PLATE
5. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT LH




6. REMOVE VOLTAGE INVERTER ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 bolts and the voltage inverter assembly.




7. INSTALL VOLTAGE INVERTER ASSEMBLY
a. Install the voltage inverter assembly with the 2 bolts.

Torque: 5.4 Nm (55 kgf.cm, 47 in.lbf)

NOTE: Tighten the bolts in order shown in the illustration to in the voltage inverter assembly.