Inspection (Power Mirror Control System)

INSPECTION







1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
a. Check the resistance.
1. Press L on the left/right adjustment switch.
2. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the outer mirror switch.




3. Press R on the left/right adjustment switch.
4. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the outer mirror switch.







2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Check the operation.
1. Apply battery voltage to the terminals and check the operation of the mirror face, as shown in the table and illustration.
If the result is not as specified, replace the outer rear view mirror.







3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
a. Check the operation.
1. Apply battery voltage to the terminals and check the operation of the mirror face, as shown in the table and illustration.
If the result is not as specified, replace the outer rear view mirror.