Cruise Control Switch: Service and Repair

Cruise Control Main Switch:

CRUISE CONTROL MAIN SWITCH

REPLACEMENT

1. PRECAUTION
Refer to Air Bag Systems; Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3. REMOVE STEERING WHEEL COVER LOWER NO.2
4. REMOVE STEERING WHEEL COVER LOWER NO.3
5. REMOVE HORN BUTTON ASSEMBLY




6. REMOVE CRUISE CONTROL MAIN SWITCH
a. Disconnect the connector and remove the 2 screws.




b. Remove the cruise control main switch from the steering wheel.




7. INSTALL CRUISE CONTROL MAIN SWITCH
a. Install the cruise control main switch with the 2 screws and connect the connector.

8. INSTALL HORN BUTTON ASSEMBLY
9. INSTALL STEERING WHEEL COVER LOWER NO.3
10. INSTALL STEERING WHEEL COVER LOWER NO.2
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)

12. INSPECT HORN BUTTON ASSEMBLY
13. INSPECT SRS WARNING LIGHT