Headlamp Dimmer Switch: Service and Repair
HEADLAMP DIMMER SWITCH ASSEMBLYREPLACEMENT
1. PRECAUTION
Refer to Air Bag Systems; Service Precautions.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING WHEEL COVER LOWER NO.2
5. REMOVE STEERING WHEEL COVER LOWER NO.3
6. REMOVE HORN BUTTON ASSEMBLY
7. REMOVE STEERING WHEEL ASSEMBLY
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)
8. REMOVE STEERING COLUMN COVER LWR
9. REMOVE STEERING COLUMN COVER UPR
10. REMOVE SPIRAL CABLE SUB-ASSEMBLY
11. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
12. REMOVE HEADLAMP DIMMER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Remove the headlamp dimmer switch assembly as shown in the illustration.
c. Disengage the 2 claws and remove the headlamp dimmer switch assembly.
13. INSTALL HEADLAMP DIMMER SWITCH ASSEMBLY
a. Engage the 2 claws and install the headlamp dimmer switch assembly as shown in the illustration.
b. Install the headlamp dimmer switch assembly with the clamp.
c. Connect the connector.
14. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
15. INSTALL SPIRAL CABLE SUB-ASSEMBLY
16. INSTALL STEERING COLUMN COVER UPR
17. INSTALL STEERING COLUMN COVER LWR
18. CENTER SPIRAL CABLE
19. INSTALL STEERING WHEEL ASSEMBLY
20. INSPECT STEERING WHEEL CENTER POINT
21. INSPECT HORN BUTTON ASSEMBLY
22. INSTALL HORN BUTTON ASSEMBLY
23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
24. INSPECT SRS WARNING LIGHT
25. INSTALL STEERING WHEEL COVER LOWER NO.3
26. INSTALL STEERING WHEEL COVER LOWER NO.2