Power Point Socket Assy

POWER POINT SOCKET ASSEMBLY

REPLACEMENT

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT PANEL UNDER TRAY (PEDAL TYPE PARKING BRAKE)
3. REMOVE INSTRUMENT PANEL HOLE COVER (LEVER TYPE PARKING BRAKE)
4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (A/T TRANSMISSION, SEPARATE SEAT TYPE)
5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (M/T TRANSMISSION, SEPARATE SEAT TYPE)
6. REMOVE CONSOLE BOX ASSEMBLY REAR (SEPARATE SEAT TYPE)
7. REMOVE INSTRUMENT PANEL CUP HOLDER TRAY (A/T TRANSMISSION, SEPARATE SEAT TYPE)
8. REMOVE CONSOLE BOX FRONT (A/T TRANSMISSION, SEPARATE SEAT TYPE)
9. REMOVE CONSOLE BOX FRONT (M/T TRANSMISSION, SEPARATE SEAT TYPE)
10. REMOVE CONSOLE BOX FRONT (A/T TRANSMISSION, BENCH SEAT TYPE)
11. REMOVE CONSOLE BOX FRONT (M/T TRANSMISSION, BENCH SEAT TYPE)
12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
13. REMOVE RADIO RECEIVER ASSEMBLY
14. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
15. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.1
16. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
17. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
18. REMOVE INSTRUMENT PANEL LOWER LH
19. REMOVE INSTRUMENT COVER SUB-ASSEMBLY LOWER




20. REMOVE POWER POINT SOCKET ASSEMBLY
a. Turn the socket counterclockwise as shown in the illustration, disengage the claw between the socket and the power point socket cover, and push the socket out towards the room side.




b. Align the socket with the notch on the power point socket cover, and remove the power point socket assembly on the room side.

21. INSTALL POWER POINT SOCKET ASSEMBLY
a. Align the socket with the notch on the power point socket cover, and push the power point socket assembly firmly into the cover to install it.

22. INSTALL INSTRUMENT COVER SUB-ASSEMBLY LOWER
23. INSTALL INSTRUMENT PANEL LOWER LH
24. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
25. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
26. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER NO.1
27. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
28. INSTALL RADIO RECEIVER ASSEMBLY
29. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
30. INSTALL CONSOLE BOX FRONT (M/T TRANSMISSION, BENCH SEAT TYPE)
31. INSTALL CONSOLE BOX FRONT (A/T TRANSMISSION, BENCH SEAT TYPE)
32. INSTALL CONSOLE BOX FRONT (M/T TRANSMISSION, SEPARATE SEAT TYPE)
33. INSTALL CONSOLE BOX FRONT (A/T TRANSMISSION, SEPARATE SEAT TYPE)
34. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (A/T TRANSMISSION, SEPARATE SEAT TYPE)
35. INSTALL CONSOLE BOX ASSEMBLY REAR (SEPARATE SEAT TYPE)
36. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (M/T TRANSMISSION, SEPARATE SEAT TYPE)
37. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (A/T TRANSMISSION, SEPARATE SEAT TYPE)
38. INSTALL INSTRUMENT PANEL HOLE COVER (LEVER TYPE PARKING BRAKE)
39. INSTALL INSTRUMENT PANEL UNDER TRAY (PEDAL TYPE PARKING BRAKE)
40. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)