Check for Intermittent Problems

CHECK FOR INTERMITTENT PROBLEMS

HINT:
Hand held tester only:
Inspect the vehicle s ECM using check mode. Intermittent problems are easier to detect when the ECM is in check mode with a hand held tester. In check mode, the ECM uses 1 trip detection logic, which has a higher sensitivity to malfunctions than normal mode (default) using 2 trip detection logic.

a. Clear the DTCs.
b. Switch the hand held tester from normal mode to check mode.
c. Perform a simulation test.
d. Check the connector(s) and terminal(s).
e. Wiggle the harness(s) and connector(s).