C1281

DTC C1281/81 MASTER CYLINDER PRESSURE SENSOR OUTPUT SIGNAL IS FAULTY (TEST MODE DTC)

CIRCUIT DESCRIPTION

DTC Detecting Condition:

Master cylinder pressure sensor is connected to the skid control ECU in the ABS & TRACTION actuator assembly.

DTC C1281/81 is output only in the test mode (SIGNAL CHECK).

Wiring Diagram (Part 1):

Wiring Diagram (Part 2):

Step 1-2:

Step 3-4:

INSPECTION PROCEDURE

NOTE: When replacing the ABS & TRACTION actuator assembly, perform zero point calibration. Calibration