Mute Signal Circuit (Radio Receiver Assy - Tape Player Assy)

MUTE SIGNAL CIRCUIT (RADIO RECEIVER ASSEMBLY - TAPE PLAYER ASSEMBLY)

CIRCUIT DESCRIPTION
This circuit sends a signal to the tape player assembly to mute noise. Because of that, the noise produced by changing the sound source ceases.

If there is an open in the circuit, noise can be heard from the speakers when changing the sound source.

If there is a short in the circuit, even though the tape player assembly is normal, no sound, or only an extremely small sound, can be produced.

Wiring Diagram:

Step 1:

Step 2:

Step 3:

INSPECTION PROCEDURE