VSV Warning Light Circuit (Remains ON)

VSC WARNING LIGHT CIRCUIT (REMAINS ON)

CIRCUIT DESCRIPTION
Check the DTC and make sure that the normal system code is output.

(If a trouble code is output, see Diagnostic Trouble Code Chart ABS w/ EBD & BA & TRAC & VSC System).

If the ECU stores DTC, the VSC warning light comes on in the combination meter.

The skid control ECU is connected to the combination meter via CAN and Multiplex communications.

Wiring Diagram:

Step 1-4:

Step 5:

INSPECTION PROCEDURE

NOTE: When replacing the ABS & TRACTION actuator assembly, perform zero point calibration. Calibration