Distance Sensor: Service and Repair
LASER SENSORREPLACEMENT
HINT: Installation is in the reverse order of removal.
1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
2. REMOVE FRONT BUMPER ASSEMBLY
3. REMOVE FRONT BUMPER ENERGY ABSORBER
4. REMOVE FRONT BUMPER REINFORCEMENT
5. REMOVE LASER SENSOR
a. Disengage the clamp, then remove the laser sensor.
6. INSTALL LASER SENSOR
a. Install the laser sensor so that the claw contacts the flat surface around the hole on the front bumper mounting reinforcement.
NOTE: Do not insert the claw into the hole on the front bumper mounting reinforcement.
b. Engage the clamp.
7. INSTALL FRONT BUMPER REINFORCEMENT
8. ADJUST LASER SENSOR